The solenoid with a magnetic field strength of ± 500gs was recently delivered

Recently, our company successfully delivered a solenoid designed for a research institute in Shanghai.

Technical Indicators:

1. Magnetic field strength: 0- ± 500Gs

2. Maximum current approximately: 5A

3. Maximum voltage: approximately 20V

4. Working time: 10 minutes

5. Maximum size approximately: 500mm

6. Sample size; 2 inches, the sample can smoothly pass through the magnetic field area

7. The height of the solenoid should be consistent with the height of the through-hole, and the bracket can be adjusted. The solenoid will be placed on the optical platform

Match high-precision power supply+built-in Gaussian meter

Power supply technical specifications:

1) Bipolar constant current output

The power output current can continuously vary between positive and negative rated maximum currents

Smooth zero crossing without interruption of current, non switching commutation

Four quadrant operation of output current and voltage (suitable for inductive loads)

The current change rate can be set within the range of 0.00001 to 0.5 F.S./s (F.S. is the rated maximum output current of 5A)

AC input, three-phase 380V ± 10% (50Hz/60Hz)

The output voltage range is 0- ± 40V, and the output current range is 0- ± 5A.

If the power supply is too small, you can consider increasing it